Firmware versions (Model Pro)
1.1.20
Release date: 03.11.2023
CB_PREM 1.0.0.36
TB_PREM 1.0.0.28
SB_PREM 1.0.0.24
FC_PREM 1.0.0.13
FCRX_PREM 1.0.0.8
AB_PREM 1.0.0.7
FCRF_PREM 1.0.0.13
CHB_PREM_CHES 1.0.1.10
CSB_PREM 1.0.0.3
Improvements:
- Added option for end-user chair calibration
- Improved chair calibration diagnostics
- Improved EEPROM protection
- SWING foot control implemented for SRG micro motor
- (bugfix) Wireless foot control battery discharging quickly while the chair is off
- (bugfix) Hygiene solenoid valves for syringe didn’t sometimes close for hygiene start
- (bugfix) An instrument sometimes kept running while foot control was deactivated while another button is depressed
Older versions
1.1.13
Release date: 24.06.2023
CB_PREM 1.0.0.36
TB_PREM 1.0.0.28
SB_PREM 1.0.0.24
FC_PREM 1.0.0.13
FCRX_PREM 1.0.0.8
AB_PREM 1.0.0.7
FCRF_PREM 1.0.0.13
CHB_PREM_CHES 1.0.1.10
CSB_PREM 1.0.0.3
Improvements:
- Added control of micro motor LED light power via the service menu of an instrument
- Improved communication of wireless foot controller
- Added signalization of foot controller pairing on the RF receiver PCB
- Improved stand by mode of wireless foot controller
- FW preparation for adding recipro mode for micro motors
- FW preparation for new SWING foot controller
- Improved water bottle calibration system
- (bugfix) Unit configuration sometimes changed after FW update
- (bugfix) Some setting were moved between instruments while double-work activated
1.1.11
Release date: 14.11.2022
- Critical update - all dental units with FW 1.1.7 must be updated to FW 1.1.11 or newer
CB_PREM 1.0.0.31
TB_PREM 1.0.0.24
SB_PREM 1.0.0.23
FC_PREM 1.0.0.10
FCRX_PREM 1.0.0.6
AB_PREM 1.0.0.7
FCRF_PREM 1.0.0.9
CHB_PREM_CHES 1.0.1.7
CSB_PREM 1.0.0.2
Improvements:
- (bugfix) CB_PREM was randomly bringing itself into incorrect state, where the dental unit stopped functioning altogether
1.1.7
Release date: 18.10.2022
CB_PREM 1.0.0.29
TB_PREM 1.0.0.23
SB_PREM 1.0.0.23
FC_PREM 1.0.0.10
FCRX_PREM 1.0.0.6
AB_PREM 1.0.0.7
FCRF_PREM 1.0.0.9
CHB_PREM_CHES 1.0.1.7
CSB_PREM 1.0.0.2
Improvements:
- added Instrument Stop command when communication with foot controller fails
- instruments are now operable with last settings when Bluetooth connection is interrupted
- added option to program chair memory positions via foot controller
- added function for automatic cup filling
- added control modes for some scalers
- added flashing of LED on FC_PREM_R1 PCB while pairing with foot controller
- (bugfix) foot controller battery state indication on tablet corrected
- (bugfix) identification of carried vs. lift unit correction
- (bugfix) double – work operation improved
- (bugfix) foot controller FCRF Timeout error corrected
- (bugfix) chip-blower function improved
1.0.8
Release date: 13.08.2021
CB_PREM 1.0.0.16
TB_PREM 1.0.0.16
SB_PREM 1.0.0.18
FC_PREM 1.0.0.5
FCRF_PREM 1.0.0.3
FCRX_PREM 1.0.0.2
AB_PREM 1.0.0.6
CHB_PREM_2H 1.0.0.5
CHB_PREM_CHES 1.0.0.11
Improvements:
- adjustment to water servo drive control
- distilled water bottle is now depresurized for top-up when Alpron bottle is empty (with DIPLOMAT hygiene)
- some messages are now displayed for short period only to keep the working interface clean
- (bug fix) micro motors message FATAL COMMUNICATION ERROR displayed randomly
- (bug fix) HW revision of CHES_GREAT not displayed correctly
1.0.7
CB_PREM 1.0.0.15
TB_PREM 1.0.0.14
SB_PREM 1.0.0.17
FC_PREM 1.0.0.5
FCRF_PREM 1.0.0.3
FCRX_PREM 1.0.0.2
AB_PREM 1.0.0.5
CHB_PREM_2H 1.0.0.5
CHB_PREM_CHES 1.0.0.9
Improvements:
- adjustment to water servo drive control
- bowl homing adjustment with convertible unit
- bowl flush adjustment when emptying WEK
- added notification of activated safety microswitches
- chair referencing changed to only go each way once
- (bug fix) double-work operation while using syringe
- (bug fix) cup water heater overheating
- (bug fix) FCRF timeout message removed